With every print purchase, I will send a simple, easy-to-understand care guide tailored to the specific print medium you order. I use museum-grade materials that are meant to last. However, proper handling and display are important to preserving the beauty, color, and longevity of your artwork for years to come.
Below, you’ll find more detailed information on how to properly care for each print medium I offer, including handling recommendations, display considerations, cleaning tips, and best practices for long-term preservation.
How to Care for Chromaluxe Metal Prints
General Care
- Handle by the edges with clean, dry hands or wear cotton gloves to minimize fingerprints.
- Support the print from underneath when moving or hanging it.
- Chromaluxe metal prints are highly durable and scratch-resistant, but they can still dent, bend, or scratch if dropped or mishandled.
Cleaning
- No special cleaning products are required. Use a non-ammonia glass cleaner and a soft microfiber cloth.
- Wipe gently outward from the center using light pressure.
- Avoid abrasive pads, rough cloths, paper towels, or harsh cleaning chemicals.
Things to Avoid
- Avoid prolonged exposure to direct, intense sunlight to maximize print longevity.
- Avoid environments with excessive moisture, salt air, or corrosive chemicals.
- Do not place heavy pressure on corners or edges, as this may cause bending.
LEARN MORE ABOUT CHROMALUXE METAL PRINTS
How to Care for Loose Paper Prints
General Care
- Handle with clean, dry hands or wear cotton gloves to avoid fingerprints and oils transferring onto the paper.
- Avoid touching the printed surface whenever possible.
- Support the print carefully from underneath the long edge to prevent bending, creasing, or corner damage.
- For best long-term preservation, frame prints using archival materials and UV-protective glazing whenever possible.
Cleaning
- To remove light dust, use a handheld air blower or a soft anti-static microfiber cloth with very gentle pressure.
- Do not attempt to aggressively remove smudges, stains, or marks from the print surface.
- Never use household cleaners, sprays, water, paper towels, or abrasive cloths on the print.
Things to Avoid
- Keep prints away from direct sunlight, excessive heat, humidity, and rapid temperature changes.
- Avoid exposure to smoke, candles, cooking oils, and airborne contaminants that may discolor the paper over time.
- Do not store prints in damp basements, hot attics, garages, or other uncontrolled environments.
- Avoid stacking unprotected prints directly on top of one another to prevent surface scratches or pressure marks.
- Avoid placing heavy objects on top of prints to prevent indents or scratches.
LEARN MORE ABOUT LOOSE PAPER PRINTS
How to Care for Lumachrome TruLife Acrylic Prints
General Care
- Handle with clean, dry hands or wear cotton gloves to avoid fingerprints and oils on the acrylic surface.
- Always support the print from underneath when carrying or installing it. Never lift or carry the print by a corner or by the acrylic face alone.
- Acrylic prints are durable but can still scratch if handled improperly
Cleaning
- No special cleaning solution is required. Use a non-ammonia glass cleaner and clean the surface similarly to glass.
- Spray cleaner onto a soft microfiber cloth rather than directly onto the print whenever possible.
- Gently wipe outward from the center using light pressure.
- Avoid abrasive pads, rough cloths, paper towels, or harsh chemicals, as they may scratch the acrylic surface.
Things to Avoid
- Avoid placing prints near heat sources, fireplaces, or areas with excessive humidity such as poorly ventilated bathrooms.
- Prolonged exposure to direct, intense sunlight may gradually reduce print longevity over time.
- Avoid leaning sharp or hard objects against the acrylic surface.